Custom Bathroom Vanities: How to Choose One That Fits Your Bathroom

The vanity is the hardest-working piece of joinery in a bathroom. It holds the basin, hides the plumbing, stores most of what you use every morning, and takes more water and wear than any other cabinet in the house. Getting it right matters more than most tile decisions.

This guide covers when a custom vanity is worth it, the sizes that work, and the material choices that decide how long it lasts.

When a custom vanity is worth it

Off-the-shelf vanities come in fixed widths, usually 600, 750, 900, 1200 and 1500 mm. If your wall happens to suit one of those and the plumbing lines up, a standard unit can be a sensible choice.

A custom vanity earns its cost when:

  • The wall is an odd length and a standard unit would leave a gap that collects dust
  • The bathroom is small and every centimetre of storage counts
  • The house is older and the walls or floor are out of square
  • You want drawers arranged around what you actually store
  • You want the vanity to match other joinery in the home

Getting the size right

Height

Most vanities finish with the benchtop around 850 to 900 mm from the floor. Taller households are often more comfortable at the upper end. If you are using an above-counter basin, the cabinet needs to be lower so the rim of the basin lands at a comfortable height.

Depth

A depth of around 450 to 500 mm suits most bathrooms. In a narrow ensuite, a slimline vanity of about 350 to 400 mm with a semi-recessed basin can keep the walkway clear.

Width

For a double vanity, allow roughly 1500 mm or more so two people can use it without bumping elbows. Below that, a single basin with generous bench space is usually the better use of the wall.

Wall-hung or floor-standing

A wall-hung vanity shows more floor, which makes a small bathroom feel larger and makes cleaning easier. It needs solid fixing in the wall, so it is best planned before the walls are lined and tiled.

A floor-standing vanity gives slightly more storage and suits traditional homes. A recessed kickboard keeps it from looking heavy.

Drawers beat doors

Cupboards under a basin become a pile of bottles you have to kneel to reach. Drawers bring everything forward. A U-shaped top drawer that wraps around the waste pipe recovers space most vanities waste, and a deep bottom drawer takes tall bottles and hair appliances.

Materials for a wet room

  • Carcass: moisture-resistant board is the baseline for any bathroom cabinet.
  • Doors and drawer fronts: laminate is hard-wearing and cost-effective; two-pack polyurethane gives a smooth painted finish; timber veneer adds warmth and needs good sealing and ventilation.
  • Benchtop: engineered and natural stone, solid surface and compact laminate all cope well with water.
  • Hardware: soft-close runners and hinges rated for humid rooms are worth paying for.

Whatever the finish, edges and cut-outs must be sealed properly. Most vanity failures start where water gets into an unsealed edge.

Plan it with the rest of the bathroom

The vanity should be designed alongside the plumbing, power points, mirror or shaving cabinet, and lighting, not chosen afterwards. Moving a waste pipe a small distance at the planning stage is easy. Moving it after tiling is not.

Custom vanities in Bowral and the Southern Highlands

Bowral Joinery makes custom vanities and bathroom cabinetry as part of our bathroom renovations, and as stand-alone custom joinery. To talk through your bathroom, call 0489 986 132 or request a quote.

Leave a Reply

Your email address will not be published. Required fields are marked *